Move over a network cable
A network (Ethernet) cable plugged straight between the two computers is the fastest way to move a lot of data. It needs no router and no Wi-Fi.
What you need
- An Ethernet cable.
- An Ethernet port on both computers, or a USB Ethernet adapter where one is missing.
Steps
Plug the cable into both computers.
On the old computer, open Clone Studio, select This is my OLD computer and choose what moves.
Under How should the two computers talk?, select Direct cable.
Note the 6-digit code on the Ready and waiting screen.
On the new computer, select This is my NEW computer, then Direct cable.
Select the old computer when it appears, and enter the code under Type the code.
Review the list and select Bring it over.
From here the transfer runs as it does over Wi-Fi: it is encrypted, it continues after an interruption, and it ends with a receipt.
If the old computer does not appear
- Check that the cable is seated at both ends and that Clone Studio is open on the old computer.
- Give the computers a moment after plugging in; a direct link takes a little time to come up.
- Pick the same option on both computers.